Page 1 of 1

PostPosted: Tue Aug 02, 2005 12:43 am
by marlai
Daer All,

Please help me.
I am looking for a device (the gateway2 of below path) when 160.101.150.131:104 send data to 160.101.152.99:4056, it will redirect / map it to internal IP 144.54.50.99:4056.
Can I make use FREESCO? if yes, which module shall I install and how the setting is?

In other words, where all requests from the same internal IP address and port are mapped to the same external IP address and port. Furthermore, any external host can send a packet to the internal host, by sending a packet to the mapped external address. (Bi-directional IP mapping, any side can be the source)

Best Regards.

marlai


160.101.150.131:104 (Source 1)
160.101.150.141:104 (Source 2)
|
160.101.150.254 (Gateway 1)
160.101.159.2 (Gateway 1)
|
160.101.159.1 (Firewall)
160.101.159.13 (Firewall)
|
160.101.159.14 (Gateway 2)
160.101.152.101 (Gateway 2)
|
160.101.152.99:4056 (144.54.50.99:4056) (Dest 1)
160.101.152.90:1200 (144.54.50.90:1200) (Dest 2)

PostPosted: Fri Aug 05, 2005 7:53 am
by Allen
Forum Rules FREESCO 1.44Mb floppy Wish List Section

<span style='color:red'>Please remember this is a wish list section, not a discussion section.</span>

Also remember this is a "floppy disk" system, all files need to fit on a single floppy disk (1.44Mb) and still have room for the important stuff, like the rest of FREESCO