Freesco + Vpn клиетн, &#

Postby Mikhail » Fri Oct 24, 2008 3:27 am

Здравствуйте.

Ковыряюсь уже не один день, но безрезультатно. Если не трудно подскажите, как настроить Frisco.
Есть провайдер раздающий Интернет по VPN.
При подключение рабочий машины под Win XP, провайдер сразу выдаёт:

IP 10.197.52.ХХХ
Маску 255.255.ХХХ.ХХХ
Шлюз 10.197.48.ХХХ

Далее надо создать VPN соединение, и вводить пароль и логин.
При дозвоне, провайдер выдаёт следующие:

Имя устройства Минипорт WAN (L2TP)
Тир устройства vpn
Тип сервера PPP
Транспорт PCP/IP
Проверка подлинности MD5 CHAP
Сжатие (нет)
Формирование пакетов
многоканального PPP Выкл.
IP Адрес сервера 85.21.0.ХХХ
IP Адрес клиента 93.80.246.ХХХ

Установил Freesco, на HDD другой машины, настроил, воткнул кабель в eth0 карту, в eth1 воткнул рабочею машину под Win XP. Win XP сразу получил от Freesco локальный IP. Сама машина под Freesco получила IP от провайдера, то есть коннект с сервером состоялся. Однако IP выданный провайдером как я понял внутренней, то есть локальной сети провайдера.
Я в строке 91 прописал и логин, и пароль для доступа в Интернет. В 633 строке прописал IP eth0 своей машины под Fresco, куда подключаю провайдера.
Когда пингую провайдера, пинг проходит, а когда пытаюсь пропинговать yandex.ru например, то тишина. То есть коннект с провайдером есть, а доступа в Интернет нет. Получается, что Fresco не звонит к провайдеру и не передаёт логин и пароль на подключение.
Может, нужна команда на дозвон? Или дополнительный пакет?
Буду, признателен, если укажете куда копать.

P.S. Раньше проблем не было с Freesco, она стояла и работала как Ethernet роутер, но пришлось поменять провайдера, а у него VPN вот тут и началось мучение. Где собака порылась, не могу понять. Если нужен, будет рапорт, выложу.
На машине стоит Freesco v0.3.8 без всяких пакетов, чисто Freesco.

Заранее благодарен.
User avatar
Mikhail
Newbie
 
Posts: 5
Joined: Fri Oct 24, 2008 3:10 am

Postby Lightning » Fri Oct 24, 2008 7:22 pm

Я использую online переводчика, поэтому я may or may not понять вы спрашиваете.
Но оно звучает как вы потребность пойти через главным образом установку и установить система для ethernet PPP и выбрать PPtP как протокол.
If you are afraid that you might make a mistake. The chances are high that you will never learn anything.
User avatar
Lightning
FREESCO GOD !!
 
Posts: 12079
Joined: Wed Nov 14, 2001 6:50 am
Location: Oregon, USA

Postby Mikhail » Sat Oct 25, 2008 2:32 pm

Hello Lightning!

Pick is not one day, but to no avail. If not difficult tool, how to configure Frisco.
There is a provider of resonant Internet VPN.
When you connect the сomputer working under Win XP, provider immediately issue:

IP 10.197.52.XXX
Mask 255.255.XXX.XXX
Gateway 10.197.48.XXX

Next need to create a VPN connection, and enter your password and username.
With dial-up provider gives the following:

The name of the device Miniport WAN (L2TP)
Tire device vpn
Server type PPP
Transport PCP / IP
Verification MD5 CHAP
Compression (none)
Formation packages PPP cross-Off.
IP Address Server 85.21.0.XXX
Client IP address 93.80.246.XXX

Installed Freesco, the HDD another machine, configured, input cable eth0 card in eth1 input working machine under Win XP. Win XP immediately received from Freesco local IP. The very vehicle under Freesco received from the IP provider, or connect to the server place. However, IP issued by the provider as I understand the internal, or local area network provider.
I am in the line of 91 prescribed and login and password to access the Internet. In 633 of the prescribed IP eth0 his сomputer under Fresco, which connect the provider.
When Ping provider, ping passes, but when I try to ping yandex.ru example, the silence. That is, there is a connection with the provider and Internet access not. It turns out that Fresco did not call to the ISP and does not pass the login and password to connect.
Maybe you need a team to the dial-up? Or an additional package?
I would be, grateful if specify where to dig.

P.S. Previously, there was no problem with Freesco, she stood and worked as an Ethernet router, but had to change provider, but he VPN here and began torment. Where porylas dog, I can not understand. If you want to be a report, overlaid.
By car is Freesco v0.3.8 without packages, purely Freesco.

Thanks in advance.

Thank you Lightning for attention to my question!
I ask a petition for my English!
User avatar
Mikhail
Newbie
 
Posts: 5
Joined: Fri Oct 24, 2008 3:10 am

Postby Lightning » Sun Oct 26, 2008 12:11 pm

Пожалуйста прикрепите «report.txt», котор
вы могли также нагрузить модули ppp_mppe.o от modules-038.zip в директорию /boot/drv/.
If you are afraid that you might make a mistake. The chances are high that you will never learn anything.
User avatar
Lightning
FREESCO GOD !!
 
Posts: 12079
Joined: Wed Nov 14, 2001 6:50 am
Location: Oregon, USA

Postby Lightning » Mon Oct 27, 2008 4:10 am

Я получал ваше report.txt и я не могу найти VSе недостатки на вашей перегородке. Несчастливо я думаю что языковой барьер идет быть к много, котор нужно пересечь по мере того как я реально неуверен о что типа соединения ваш ISP требует и без точно английского объяснения я не думаю я может реально помочь больше с этой точки зрения используя online переводчика.

Я надеюсь модератор этого раздела форума получит, котор включили в ближайшее время.
Огорченно
If you are afraid that you might make a mistake. The chances are high that you will never learn anything.
User avatar
Lightning
FREESCO GOD !!
 
Posts: 12079
Joined: Wed Nov 14, 2001 6:50 am
Location: Oregon, USA

Postby Mikhail » Mon Oct 27, 2008 7:39 pm

Hello Lightning!
Big thanks for desire to help me .
Yes unfortunately I badly know English, and I can not correctly explain.
But if you will allow I shall try to formulate briefly and clearly the question in English and I shall send you the personal message.

You send me message and I understand you without the translator.
Write please in technical English the essence. So will be more understanding.

If you understand my English can create in English forum same a theme or this superfluous?
User avatar
Mikhail
Newbie
 
Posts: 5
Joined: Fri Oct 24, 2008 3:10 am

Postby Lightning » Tue Oct 28, 2008 1:45 am

There is no need to start a new thread in the English forum.

What I need is the exact settings in the system you are currently using to connect to this ISP so that I can have a base of what that connection is. When you state that it is a VPN connection it does not really mean anything due to the fact there are so many different types of VPN connections and FREESCO. This could be as simple as changing some of the /etc/ppp/pptp.org lines to get the connection working.
If you are afraid that you might make a mistake. The chances are high that you will never learn anything.
User avatar
Lightning
FREESCO GOD !!
 
Posts: 12079
Joined: Wed Nov 14, 2001 6:50 am
Location: Oregon, USA

Postby Mikhail » Wed Oct 29, 2008 12:34 pm

Hello Lightning!

My provider has given me here this information for Linux system. It is possible xl2tpd to adapt a package under Freesco or in Freesco there is an analogue of this package

<a href='http://www.translate.ru/url/wideTranslation.aspx?sid=220f4ddf-d084-4a7d-ba71-b4ce1ba6d9cd&from=adv&direction=re&template=Internet&autotranslate=on&transliterate=&showvariants=&viewModeSelected=result&url=http://www.solargate.ru/nastroika-vpn-po-l2tp-v-ubuntu-8-04' target='_blank'>http://www.translate.ru/url/wideTranslatio...p-v-ubuntu-8-04</a>
User avatar
Mikhail
Newbie
 
Posts: 5
Joined: Fri Oct 24, 2008 3:10 am

Postby Lightning » Wed Oct 29, 2008 7:21 pm

I have looked at the Openl2tp source and it requires at least a 2.4.27 Linux kernel to compile and be added into the kernel source for the l2tp protocol. So that is definitely not going to work in FREESCO.

But looking at the artical it looks like a standard PPtP connection should still work with the possibly some adjustments to the configuration file. If you look at /etc/ppp/pptp.opt you should see some of the changes that might be needed for this type of connection. But be aware that file is the working file and to activate the changes you would need to use

Code: Select all
rc_net restart


Also if you do find the changes needed to make this work you will need to copy the /etc//ppp/pptp.org file into the /boot/etc/ppp/ directory. I would strongly recommend installing the "mc" package on this system to help with making these types of system changes and during the process make sure that you enable the pppd debugging code.

If you have problems with this make sure that pppd debugging is on and try to make a connection. Then immediately after it fails issue the following command and post the report.txt that is generated here.

Code: Select all
report  `cat /var/messages`
If you are afraid that you might make a mistake. The chances are high that you will never learn anything.
User avatar
Lightning
FREESCO GOD !!
 
Posts: 12079
Joined: Wed Nov 14, 2001 6:50 am
Location: Oregon, USA

Postby Mikhail » Fri Nov 07, 2008 2:11 pm

Thanks you for help Lightning!

But after many failures to adjust VPN in Freesco, I have left this invention. I not the expert in Linux and me difficultly correctly to adjust VPN, I tried to do everything as you spoke, searched on the Internet much, but is ineffectual. I have made decision to use separately the device a router. But Freesco very much it is pleasant to me, and I regret that I can not adjust VPN in Freesco.
User avatar
Mikhail
Newbie
 
Posts: 5
Joined: Fri Oct 24, 2008 3:10 am

Postby dingetje » Fri Nov 07, 2008 7:03 pm

Maybe <a href='http://dingetje.homeip.net/packages/0.3.x/non-package/l2tpd-0.69.tar.gz' target='_blank'>http://dingetje.homeip.net/packages/0.3.x/...tpd-0.69.tar.gz</a> can be used here?

Its a user space L2TP tunnel, <a href='http://www.l2tpd.org' target='_blank'>http://www.l2tpd.org</a> (domain seems to be hacked now :(, but you can still see the original site on the wayback archive: <a href='http://web.archive.org/web/20050222025732/http://www.l2tpd.org/' target='_blank'>http://web.archive.org/web/20050222025732/.../www.l2tpd.org/</a> )

I only compiled the thing a few years ago for someone here in the Netherlands, and he reported he was able to get it to work.
GreetZ
http://dingetje.hopto.org

"Software is like sex: it's better when it's free." - LINUS TORVALDS
User avatar
dingetje
FREESCO GURU !!
 
Posts: 1010
Joined: Wed Nov 14, 2001 12:13 pm
Location: The Netherlands


Return to Russkij - Russian

Who is online

Users browsing this forum: No registered users and 1 guest

cron