Kernel for dual 586

3rd Party Package Requesting

Kernel for dual 586

Postby Nab » Wed Jul 07, 2010 8:05 am

Exists kernel-040.686-dual-vipc-cd-triton-power_off

Please compile same kernel for two Pentium MMX 233Mhz on SOYO i430HX

Computer ID : FC, SubTyp: 01, BIOS-Level: 0
Rechnertyp : AT-3, Konfigurationsbyte $74
Maustreiber : Microsoft kompatibel, Version: 08.30
Maustyp : PS/2-Maus
Bus : ISA/PCI
Hauptspeicher : 640 KB, davon verf?gbar : 640 KB
Extended Memory : 128 MB
BIOS Datum : 11/14/97
PCI-BIOS gefunden : Version 02.10, 32-Bit-PCI-BIOS Revision:0
PCI-Busse : 1, Konfig-Mech.: 1, Special-Cycle-Mech.: 1
Award BIOS gefunden : Award Modular BIOS v4.51PG
Award ID-String : 11/14/97-i430HX-2A59FS2AC-00
Board/BIOS-Version : TF-1114
OEM : SOYO
URL : http://www.soyo.com.tw/bios.htm
Chipset : i430HX //Intel Triton-HX
INT-13h BIOS Extension: ja, Version:1.x, Fknt 41..48 unterst?tzt
PnP (ACFG,ESCD,DMI) : PnP V1.0/ESCD, DMI V 2.0, APM V1.2
User avatar
Nab
Newbie
 
Posts: 23
Joined: Mon Apr 04, 2005 8:07 pm
Location: Ukraine, Kiev

Re: Kernel for dual 586

Postby Lightning » Wed Jul 07, 2010 8:10 pm

Please compile same kernel for two Pentium MMX 233Mhz on SOYO i430HX

Hmmmm, a MMX 233 is a 686 processor which came both as a socket 7 or a slot 1 configuration. But they did make a 233 P1 socket 7 non MMX processor, so be sure which ones you have.
586 processors stopped with P1 and the MMX processor is a PII. However the Pentium Pro processors are also 686 processors.
I personally ran the above kernel for quite a while on a dual PII 333 system and it is a nice kernel to run that way because different processes go to different processors. So no matter how busy the system gets it is still very responsive. Also with the Triton hard drive chipset you will want to download and install the full hdparm binary to configure the hard drive for better throughput.
If you are afraid that you might make a mistake. The chances are high that you will never learn anything.
User avatar
Lightning
FREESCO GOD !!
 
Posts: 12079
Joined: Wed Nov 14, 2001 6:50 am
Location: Oregon, USA

Re: Kernel for dual 586

Postby Nab » Thu Jul 08, 2010 6:27 pm

However this kernel cannot run :(
Stopped without any error.

Freesco installed on Transcend DOM (DiskOnModule) Flash Drive 256Mb.
User avatar
Nab
Newbie
 
Posts: 23
Joined: Mon Apr 04, 2005 8:07 pm
Location: Ukraine, Kiev

Re: Kernel for dual 586

Postby Lightning » Thu Jul 08, 2010 8:40 pm

If you are afraid that you might make a mistake. The chances are high that you will never learn anything.
User avatar
Lightning
FREESCO GOD !!
 
Posts: 12079
Joined: Wed Nov 14, 2001 6:50 am
Location: Oregon, USA

Re: Kernel for dual 586

Postby Nab » Fri Jul 09, 2010 6:58 am

Big tnx, Lightning! Worked!!!

e) Detect Hardware show:

Code: Select all
processor       : 0
model           : Pentium MMX
vendor_id       : GenuineIntel
bogomips        : 463.67
processor       : 1
model           : Pentium MMX
vendor_id       : GenuineIntel
bogomips        : 463.67

MemTotal:    127740 kB

Ethernet controller: Realtek 8139 (rev 16).
Ethernet controller: Realtek 8139 (rev 16).
Ethernet controller: Realtek 8139 (rev 16).
Ethernet controller: Realtek 8139 (rev 16).


Used grub4dos and two Pentium MMX 166Mhz overcloced to 233 :) (worked 10 year) uptime very long... :)
User avatar
Nab
Newbie
 
Posts: 23
Joined: Mon Apr 04, 2005 8:07 pm
Location: Ukraine, Kiev


Return to 3rd Party Package Requesting

Who is online

Users browsing this forum: No registered users and 10 guests

cron